RXCBE-9800C self-healing capacitor intermittent durability test device (new model)

This device is designed and manufactured in accordance with the requirements of GB/T3667·1-2016, IEC60252·2-2011, GB12747-1991, Japan JIS C 4908-2007 and other standards. It is suitable for capacitor manufacturers, household appliance factories and quality inspection departments to conduct capacitor quality inspection. The device uses parallel reactors for precise compensation, which makes it have very low requirements for grid capacity. It uses PLC+touch screen control, which can digitally set the test voltage, operating time, test capacity, power on and off time, number of times, etc.; and digitally display the test voltage and each capacitor test current. The system is equipped with an electric voltage regulator, which can automatically increase and decrease the voltage, and at the same time complete the automatic voltage regulation of the output voltage, eliminating the need for a voltage regulator. It has the characteristics of simple operation, intuitive display, and convenient adjustment.

1. Test range: 1~50μF Un≤500V self-healing capacitor

2. Test voltage: 0~700V, digital setting, display accuracy ±1%FS

Voltage control accuracy: ±(1%+2V), voltage setting resolution is 1V

3. Working mode

A. Continuous endurance mode:

Test time: 0.1~9999.9 hours Power-off memory ±0.2%

Time control accuracy index: ±(0·1%+1min;)

B. On-off endurance mode:

Test on-off time setting: 1.0~999.9S;

On-off times 1~999999 times can be set

Test number accuracy: ±1 time

４、Equipment load: The total equipment load does not exceed 1050uF

Number of test paths: 21 paths, each path does not exceed 50uF

Each path has an overcurrent protection circuit and charging and discharging resistors;

５、Control uses Siemens PLC+touch screen to set, control, and display test voltage, current, number of times, time and other parameters in real time